Tilt Sensor Calibration Values

This section will appear if you have an Ontoto Artemis device. It allows you to add or update tilt sensor calibration values in the system, which can then be assigned to the device during installation using the Ontoto Connect App.

Create a Tilt Sensor Calibration Value

  1. Go to the Ontoto Web Portal.
  2. Click on Settings in the menu bar and select Tilt Sensor Cal Values.
  3. Click on Create Tilt Sensor Cal Value.
  4. Select Equation Type.
  5. Enter Physical Tilt Sensor Serial Number, C0, C1, C2, C3, C4, and C5.
  6. Attach the Calibration Sheet.
  7. Click on Create Tilt Sensor Cal Value.

During installation, assign the Tilt Sensor Calibration Value to the device using the Ontoto Connect App. Refer to the provided Installation Guide that comes with your device.

Note: During installation, assign the Tilt Sensor Calibration Value to the device using the Ontoto Connect App. Refer to the provided Installation Guide that comes with your device.